Supacat seats

HEX 6×4 & 6×6 Conversions For the Ford Ranger

Working in collaboration with Ricardo, we are assisting in the construction of the chassis for the 6×6 conversion for the Ford Ranger.

The HEX solution differs from conventional conversions as it has been conceived as an overlay bolt-on system that does not require any alteration of the Ford Ranger base vehicle, which is Europe’s number one commercial pick-up platform. This ensures that the base vehicle retains all the robustness and quality of the standard vehicle and allows the system to be removed and re-installed on a different vehicle.  

An electric rear drive system has been adopted that uses a production Ford drive unit to provide up to an additional 210kW of power, over and above the class leading 186kW of power from the existing 3.0L V6 diesel engine. The De Dion rear suspension design is not only weight efficient and robust but also provides better wheel control for improved traction and ride. In addition, the De Dion arrangement decouples the suspension and drive systems to allow a range of drive units to be used or deleted for a cost-effective 6×4 variant with maximum payload using an undriven ‘lazy’ axle.   

Metalwork Design Prototyping

General Metalwork Fabrication

Sheet Metal Fabrications

Metalwork Manufacturing Services